| Multilink IP Bandwidth Aggregation and Management | |
| Protocols | TCP/IP, RIP, DHCP, TFTP, PPP, PPPoE |
| Bandwidth control (site-site) | Multilink IP (ML-IP) aggregates connections into a site to site tunnel |
| High availability | All active links aggregate data (no idle links) |
| Automatic fallback to fewer broadband links for resiliency | |
| Broadband fail-over to up to 4 bonded dial backup links | |
| Carrier access service | xDSL, Leased Line, or Cable (up to 4 links) |
| ISDN, PSTN or wireless (up to 4 links) | |
| Primary access ports | Supports 4 xDSL or leased line routers, xDSL bridges |
| Backup access ports | Supports 4 analog modems, ISDN TAs |
| Operating System supported | Red Hat Linux 7.2 |
| Networks supported | Any IP-enabled network (Private, Public, Frame Relay, ATM) |
| Compatibility | Works with all CPE VPN and firewall solutions |
| Bandwidth control (Internet) | Load-balances Internet sessions (outbound requests) over available links |
| Monitoring and Configuration | |
| Configuration | Simple browser based tool |
| Monitoring | Discovery on local network; network and communications statistics; hardware status |
| Product | Description | Rec. System Configuration |
| ePipe ML-IPC-10 | Terminates 10 ML-IP tunnels | 800MHz Celeron, 256MB RAM |
| ePipe ML-IPC-50 | Terminates 50 ML-IP tunnels | 1.4GHz P4, 256MB RAM |
| ePipe ML-IPC-100 | Terminates 100 ML-IP tunnels | 2 GHz P4, 256MB RAM* |
| Click here to active ML-IP tunnels within your ML-IP Concentrator | ||
| * ePipe ML-IPC-100 requires 64-bit PCI Ethernet cards | ||
about ePipe | products | solutions | support | information center | contact us
Copyright © 2002 ePipe Pty. Ltd. All rights reserved.
