ePipe Pty. Ltd. Software Release Note ===================== ============================================================================== ePipe ServerWare Family Software Release Note ============================================================================== The latest ePipe ServerWare software updates the ePipe ServerWare system with all of the latest feature additions and bug fixes. CONTENTS ======== 1. General 2. Release History _______________________________________________________________________________ 1. General =========== Media Format ------------ The ePipe ServerWare software is delivered as a CD-ROM or as a ISO9660 binary CD image file for writing (burning) to a writable CD (CD-R). The CD can then be used to update or completely re-install ePipe ServerWare. _______________________________________________________________________________ 2. Release History =================== ====================== ePipe ServerWare 2.3.0 ====================== Date 28 February 2002 Ver 2.3.0 Prev 2.1.0 Description of Release ---------------------- This is a general release of the ePipe ServerWare software and supports all existing ePipe ServerWare models. Compatibility ------------- This software release is compatible with: ePipe ServerWare Concentrator-10 ePipe ServerWare Concentrator-50 ePipe ServerWare Concentrator-150 ePipe ServerWare Concentrator-500 New Features and Changes ------------------------ * Bonding of any Ethernet based Internet connection (ML-IP) * Automatic fail-over to multiple backup links (modems, ISDN, ADSL) * Support for new AES encryption standard * Support for IKE (Internet Key Exchange) * Improved filtering to enhance security * Improvements to the DHCP server * Improvements to the look and feel of the ePipe Management Assistant * Upgrade of embedded operating system to OpenBSD 2.9 * Time based Links * NAT support for E2B-IPSec tunnels Bugs Fixed ---------- 3215 bug default route across E2B tunnel doesn't work 3506 bug ePipe Serveware isakmpd not notified of tunnel delete 3507 bug IKE tunnels with "custom" crypto suites do not work 3534 bug Creating IKE tunnel causes DOD bundle to be disabled 3539 bug IKE tunnel with custom crypto cannot use SHA1 auth 3559 bug Certain ePipe error messages (185, 186) do not work properly 3505 bug PPTP tunnels in ePipe ServerWare do not pass data 3668 bug serverware doesn't work with multiple Stallion cards 3688 bug Dialers with FixedIP dont take over the default route 3745 bug ePipe DHCP lease time not recognized by Windows clients 3782 bug Static links are not blocking Dynamic links from connecting 3785 bug Links are disconnected prematurely 3792 bug Static dialers stuck in IDLE mode when should be CONNECTING 3102 bug ePipe gui gives poor bandwidth defaults when adding link 3204 bug Problems with changing links in a bundle 'live' 3331 bug Enabling a bundle restarts other bundles disabled by retries 3364 bug filter rules created by GUI are very weak using GUI 3654 bug TFTP filename truncated to 32 characters 3664 bug IKE IPsec tunnel traffic is blocked by external filter 3715 bug ePipe IKE crypto suite for SSH Sentinel uses wrong diffie-hellman parameters 3736 bug When VPN tunnel is disabled, loopback still added to route table 3748 bug ePipe IKE subsystem may not be aware of some network interfaces 3540 bug Incorrect IKE status shown for active server-side tunnels 3511 bug Disconnecting one PPTP tunnel can disconnect others. 2847 bug ePipe On-line Help Changes 2965 bug Link or Port config changes may require special intervention 3417 bug No syntax checking on nameserver names 3434 bug E2B 'None' encrypt/auth selection causes a warning 3701 bug SIA Wizard adds filter & NAT rules 2 bundle using existing bundle 3789 bug Support -> Contacts page still lists German office 3470 bug ePipe GUI still allows setting I2B on Ethernet 1 3250 bug Doing CONNECT LOCAL PORT n does not connect first time ====================== ePipe ServerWare 2.1.0 ====================== Date 20 November 2001 Ver 2.1.0 Prev 2.0.1 Description of Release ---------------------- This is a general release of the ePipe ServerWare software and supports all existing ePipe ServerWare models. Compatibility ------------- This software release is compatible with: ePipe ServerWare Concentrator-10 ePipe ServerWare Concentrator-50 ePipe ServerWare Concentrator-150 ePipe ServerWare Concentrator-500 New Features and Changes ------------------------ * E2B (ML-IP) over multiple IPoE/PPPoE links Bugs Fixed ---------- 3102 bug ePipe gui gives poor bandwidth defaults when adding link 3215 bug default route across E2B tunnel doesn't work 3363 bug modifying vpn characteristics using gui sets transport tcp 3506 bug ePipe Serveware isakmpd not notified of tunnel delete 3507 bug IKE tunnels with "custom" crypto suites do not work 3534 bug Creating IKE tunnel causes DOD bundle to be disabled 3539 bug IKE tunnel with custom crypto cannot use SHA1 authentication 3559 bug Certain ePipe error messages (185, 186) do not work properly 3562 bug Problems caused by I2B 3505 bug PPTP tunnels in ePipe ServerWare do not pass data 3668 bug serverware doesn't work with multiple stallion cards 3688 bug Dialers with FixedIP dont take over the default route 3703 bug 2242 PANIC running 'monitor internet ike' overnight 3709 bug IKE tunnels with custom crypto suites do not save authentication algorithms across reboot 3204 bug Problems with changing links in a bundle 'live' 3364 bug filter rules created by GUI are very weak 3671 bug IKE service not enabled by default in SW 2.1.0 daily build48 3511 bug Disconnecting one PPTP tunnel can disconnect others. 3515 bug ePipe creates garbage support report 2847 bug ePipe On-line Help Changes 2965 bug Link or Port config changes may require special intervention 3417 bug No syntax checking on nameserver names static 3434 bug E2B 'None' encrypt/auth selection causes a warning 3484 bug E2B loopback route not added routing table on tunnel close 3508 bug RAW_STATs -> BUNDLES reports incorrect VPN throughput 3537 bug PPPoE fails with bad service name 3546 bug Can't add DNS servers in static IPoE configuration 3557 bug IPoE link bandwidth GUI bug 3686 bug UNUSABLE DODs dont flush loopback route from Route Table removed 3470 bug ePipe GUI still allows setting I2B on Ethernet 1 3250 bug Doing CONNECT LOCAL PORT n does not connect first time 3516 bug IKE config not removed in ServerWare after init factory 3523 bug NAT and I2B flags not cleared on dialer until reboot 3552 bug seg fault from CLI 3576 bug No error checking in advanced filter rule creation 3600 bug Server-side ePipe IKE tunnels are not disabled fully ====================== ePipe ServerWare 2.0.1 ====================== Date 5 October 2001 Ver 2.0.1 Prev 2.0.0 Description of Release ---------------------- This is a general release of the ePipe ServerWare software and supports all existing ePipe ServerWare models. Compatibility ------------- This software release is compatible with: ePipe ServerWare Concentrator-10 ePipe ServerWare Concentrator-50 ePipe ServerWare Concentrator-150 ePipe ServerWare Concentrator-500 New Features and Changes ------------------------ * DHCP server capability added to ServerWare Bugs Fixed ---------- 3596 bug Rebooting serverware 2.0.1 loses DHCP client config 3597 bug RAW_STATs -> BUNDLES reports incorrect VPN throughput 3598 bug IKE tunnel with custom crypto cannot use SHA1 authentication 3599 bug NAT and I2B flags not cleared on dialer until reboot 3604 bug Creating IKE tunnel causes DOD bundle to be disabled 3605 bug PPPoE fails with bad service name 3608 bug Radio buttons reset to default when modifying DHCP server details 3609 prb Telnet session hangs when CTRL-SHIFT-CARAT is pressed 3610 bug modifying vpn characteristics using gui sets transport to TCP 3611 sug Blank Scripts displayed by SHOW DIALER are confusing 3618 bug ePipe creates garbage support report 3619 bug ePipe On-line Help Changes 3620 bug PPP links with same remote IP address don't work 3621 bug ePipe gui gives poor bandwidth defaults when adding links 3625 sug Fixed IP help on ModemModify doesn't provide full details 3626 sug Indicate 'backup' links on Summary page 3627 sug ePipe PPP port settings does not reflect dial-out status 3637 bug Serial RX lockup on epipe-2000 units 3638 bug Disconnecting one PPTP tunnel can disconnect others. 3639 bug IKE config not removed in ServerWare after init factory 3640 bug default route across E2B tunnel doesn't work 3641 bug filter rules created by GUI are very weak 3642 bug Invalid static DHCP IP Addresses do not show error using the GUI 3645 bug ePipe GUI still allows setting I2B on Ethernet 1 3646 bug Serverware Server cannot handle more than 127 tunnels 3647 sug No error checking when entering SPI 3649 bug PPTP tunnels in ePipe ServerWare do not pass data 3650 bug ePipe Serveware isakmpd not notified of tunnel deletion 3651 bug IKE tunnels with "custom" crypto suites do not work ====================== ePipe ServerWare 2.0.0 ====================== Date 31 July 2001 Ver 2.0.0 Prev Not applicable Description of Release ---------------------- This is the first release of the ePipe ServerWare software. Compatibility ------------- This software release is compatible with: ePipe ServerWare Concentrator-10 ePipe ServerWare Concentrator-50 ePipe ServerWare Concentrator-150 ePipe ServerWare Concentrator-500 _______________________________________________________________________________ [END]